Upgrading Firmware - Lorex LN Series Instruction Manual

Settings

Upgrading Firmware

When new firmware becomes available for your product,
you can use DigiViewer to upgrade the device.
NOTE: Ensure your device is connected to your network prior
to performing a firmware upgrade.
To upgrade firmware:
1. Visit www.lorextechnology.com
latest firmware for your camera from its product page.
2. Open DigiViewer.
3. Click Settings and then click System.
4. From the System menu click Browse to locate the
firmware file on your PC and then click Update.
5. Click OK in the dialogue box to confirm the file transfer.
6. Wait until the OK window opens.
7. Click OK.
Figure 26.2 Upgrade progress.
• The rebooting window appears.
8. Wait for 5 seconds, and then close the browser.
9. Reconnect to the camera for the changes to take effect.
84
and download the
Figure 26.1 Select the file and click Open.
Update button