Lorex LNBW421 Series Quick Start Manual

Installation Tips
To ensure the best possible wireless performance, it is recommended
to keep the following installation tips in mind when choosing a
location for the camera:
• Place the camera as close to your Wi-Fi router or access point as possible.
• Reduce the number of obstructive materials between the camera and
the router or access point. Concrete, brick, metal and wood are the most
common materials in your house that can cause poor signal strength.
• The camera uses the 2.4GHz band exclusively. Most new routers support
both 2.4GHz and 5GHz bands. It is recommended to use other Wi-Fi
devices on the 5GHz band when possible to ensure the 2.4GHz band is not
overcrowded.
• Other electronic devices such as microwaves, TVs, cordless phones, and
baby monitors can cause signal interference. It is recommended to install the
camera as far away from these devices as possible.
Additional Positioning Tips
• Point the camera where there is the least amount of obstructions (i.e., tree
branches).
• Install the camera where vandals cannot easily reach.
• This camera is rated for outdoor use. Installation in a sheltered location is
recommended.
Need Help?
Visit us online for up-to-date software
and complete instruction manuals
1
Visit lorex.com
Search for the model
2
number of your product
Click on your product
3
in the search results
4
Click on the Downloads tab
Copyright © 2019 Lorex Corporation
As our products are subject to continuous improvement, Lorex reserves the right to
modify product design, specifications and prices, without notice and without incurring
any obligation. E&OE. All rights reserved.
LNBW421_QSG_EN_R1.indd 1 LNBW421_QSG_EN_R1.indd 1
Troubleshooting
Problem Solution
Cannot set • Ensure your mobile device is connected to a 2.4GHz Wi-Fi
up camera network during setup. The camera does not work with 5GHz
networks.
• Try repositioning the camera, router, or both to improve signal
strength.
No picture / • Ensure the LED indicator on the camera is glowing steady
signal green. See "LED Indicators" section for details if otherwise.
• Ensure the camera is properly connected to power using the
included power adapter.
• Remove obstructions between your router and camera.
Materials such as brick, concrete and wood can significantly
impact the wireless signal strength.
• Try repositioning the camera, router, or both to improve signal
strength.
Picture is • Move the camera closer to the router.
dropping • Try repositioning the camera, router, or both to improve the
reception.
• Too much 2.4GHz Wi-Fi network congestion. If you are using a
dual band router, try connecting other Wi-Fi devices in the area
to the 5GHz network.
Picture is • Ensure your camera isn't pointed directly at a source of light
too bright (e.g., sun or spot light).
• Move your camera to a different location.
Picture is • Check the camera lens for dirt, dust, spiderwebs, etc. Clean
not clear the lens with a soft, clean cloth.
• Remove the vinyl cover on the camera lens.
Disclaimers
• Not intended for submersion in water. Installation in a sheltered location
recommended.
• This camera includes an Auto Mechanical IR Cut Filter. When the camera
changes between Day/Night viewing modes, an audible clicking noise may be
heard from the camera. This clicking is normal, and indicates that the camera
filter is working.
Safety Precautions
• Read this guide carefully and keep it for future reference.
• Follow all instructions for safe use and handling of the product.
• Use the camera within given temperature, humidity and voltage levels noted in
the camera's specifications.
• Do not disassemble the camera.
• Do not point the camera directly at the sun or a source of intense light.
• Periodic cleaning may be required. Use a damp cloth only. Do not use any
harsh, chemical-based cleaners.
Dimensions
6.4"
164mm
3.7"
94mm
2.8"
72mm
3.2"
81mm
2K HD Wi-Fi Bullet IP Camera
LNBW421 Series
Quick Start Guide
Package Contents
×3
×3
×1
Mounting Kit
A REGULATED UL / CSA APPROVED power supply is REQUIRED for use
with this camera (included). Use of a non-regulated, non-conforming power
supply can damage this product and voids the warranty.
2.7"
70mm
lorex.com
HD Wi-Fi Camera
Power
Antenna
Adapter
ATTENTION:
LNBW421_QSG_EN_R1
2019-11-28 3:28:23 PM 2019-11-28 3:28:23 PM