System
Use the System menu to access Advanced Parameter Settings to perform camera maintenance
and firmware upgrades.
Figure 26.0 Advanced Parameters menu—Maintenance and upgrades
Advanced Parameter Settings
The restart your camera:
1. Click Reboot to restart your camera.
2. Wait for 5 seconds, and then close the browser.
3. Re-connect to the camera.
To restore factory defaults:
1. Click Restore.
2. Wait for 5 seconds, and then close the browser.
3. Re-connect to the camera.
NOTE: Closing the browser after 5 seconds speeds up the reboot and restore progress. The
reboot / restart status bar will indicate that it is still in progress when you shut down the browser.
This is normal.
82