Appendix B: Adding Cameras; Setting Up Additional Cameras; Finding The Additional Cameras - Lorex LN Series Instruction Manual

APPENDIX B: ADDING CAMERAS

DigiViewer can let you view and control up to six Internet cameras simultaneously. To purchase
additional LNE Series Internet cameras, please visit www.lorextechnology.com.

Setting up Additional Cameras

Following your camera's quick start guide and instruction manual, set up the additional
camera(s). Make sure you have performed the following:
• Properly assembled the camera
• Mounted the camera to a desired location (optional)
• Connected the camera to your router
• Connected the camera to a power outlet
LNZ4001 (PTZ)
Figure 29.0 Assemble and setup an additional camera

Finding the Additional Cameras

To find the additional camera(s):
1. Launch DigiConsole (insert the software CD or if you have installed DigiConsole to your PC,
>
select Start Programs
2. Click Find. Your camera should appear
in the list of device.
NOTE: If you have added the new camera to
your existing network, your new camera and
your original camera should both appear in
the device list. If you are adding the new
camera to a different network...
3. Using DigiViewer, click Settings and
then Device Setup.
90
LAPTOP
WIRELESS
ROUTER
>
DigiConsole.
LNE3003
Figure 29.1 Find your new camera using DigiConsole