REMOTE VIEWING USING IPHONE,
IPOD TOUCH & IPAD
System Requirements
1. iPhone/iPod Touch users: Must have OS version 3.1.2 or greater.
2. iPad users: Must run OS version 3.2 or greater.
Compatible cameras
• Lorex LNE1001, LNE3003, and LNZ4001
The iPhone, iPod Touch and iPad are capable of remotely viewing the LN series cameras. To do
this, you will need to download an App onto your device.
• iPhone, iPod Touch Users must download the Lorex Live 2 App from the App store.
• iPad users must download the Lorex iMobile App from the App store.
Downloading the App
You must download the application from the Apple App Store.
NOTE: You must create an App Store account before you can download content. A valid credit
card is required to create an account.
• Launch the App Store application from your device.
• iPod, iPod Touch users: Search for Lorex Live 2
• iPad users: Search for Lorex iMobile.
Remote Viewing using the iPhone/ iPod Touch/ iPad
Prerequisites
1. Port forward ports 80, 554 and 8070 using the Lorex Auto Port Forwarding Wizard
• For details, see "Appendix E: Auto Port Forwarding Wizard" on page 97.
2. Create a DDNS account.
• For details, see "Appendix F: Setting Up DDNS Service" on page 104.
3. Enter your DDNS information into your camera.
• Navigate to Settings>Remote Access in Digiviewer.
Remote Viewing Using iPhone, iPod touch & iPad
Select checkbox
Enter your DDNS domain and Account name. (i.e. if your ddns name
is tomsmith.lorexddns.net, enter only tomsmith.)
35