Pan/Tilt Controls; Advanced Settings - Lorex LN Series Instruction Manual

Pan/Tilt Controls

If you are using a Lorex LNZ4001 Network Camera,
you can use the Pan/Tilt controls to use the pan and
tilt functions of the LNZ4001.
To use Pan/Tilt controls:
1. From the Main screen, select your Pan/Tilt
camera (i.e. LNZ4001 Network Camera).
2. From the Single Channel view, tap "Pan/Tilt" at
the bottom of the screen.
3. Tap the arrows to pan the camera left/right and
tilt the camera up, down, and diagonally.
4. Tap the
to the "Home" position. You must set the
"Home" position in DigiViewer. Please refer to
your camera's instruction manual for more
information.

Advanced Settings

Use the advanced settings of Lorex Live 2 / Lorex
iMobile to adjust the image stream and ports of your
connected cameras. These settings are recommended
for advanced users only.
To view advanced settings:
1. From the main screen, select your camera. If
adding a new camera, tap
2. Under ID, enter the name or location of your
camera and tap
3. Under General, select the following information
and tap to save your changes:
• URL-DDNS: enter your complete Lorex DDNS
domain name (i.e. tomsmith.lorexddns.net); you
can also enter your local or external IP address .
• Port: By default, 80. Leave the default port as 80 unless you have manually changed the port
in DigiViewer (only recommended for advanced users)
• Username: enter the user name of your camera (default, admin)
• Password: enter the password of your camera (by default, admin)
button to return the camera
.
.
Remote Viewing Using iPhone, iPod touch & iPad
Pan/Tilt controls.
Settings Menu.
39