Rear Panel; Remote Control - Strong SRT 7002 User Manual

1. Power button:

2. Remote control

sensor:
3. lEd display:
4. standby indicator:
5. usb:
6. Channel up/down:

2.3 Rear panel

1. sAT In
2. sAT ouT
3. s/PdIf
4. hdmI
5. Tv sCART
6. dvd/vCR sCART
7. Power cord
2.4 Remote Control
1. q
2. !
3. EPg
4. Info
5. TTX
6. AudIo
7. dTv/vCR
8. subTITlE
9. mEnu
4
To turn ON/OFF the main power supply
Receives the signal from the remote control
Shows channel number in operation and time in Standby
Shows power state of the receiver
Green LED - receiver is turned on
Red LED - receiver is in standby mode
For connection of external storage devices
To change channels without using the remote control
To connect to the LNB of your satellite dish for reception of satellite
broadcast signal
To loop through the satellite signal to a second receiver
To connect to a digital or home cinema audio amplifier
To connect to the HDMI input of your TV using a good quality
HDMI cable.
To connect to TV using a SCART cable
To connect to a Video or DVD recorder
The receiver requires a mains voltage of 100~240V AC 50~60Hz (auto
selecting). Please check the local power conditions before connecting
the receiver to the mains supply.
Turns the receiver ON/Standby
To turn the sound on or off.
Viewing mode: Displays the EPG (Electronic Programme Guide)
Press once to display channel number/name and now/next info. Press
twice to display detailed event info and transponder/signal strength
information. Pressing again – back to viewing mode.
To open teletext if available on the current channel.
Displays the audio selection menu with selections for available
languages and audio modes
Switches to VCR input if it is in DTV state. Switches to DTV if it is in
VCR state
To select subtitles language out of available ones on the
current channel
To open the main menu in viewing mode or to go one step back in
the menu
PART 1 • English
Fig. 2
Fig. 3