Operation; Changing Channels; Info Banner - Strong SRT 7002 User Manual

6.0 oPERATIon

In viewing mode, several features are available to make watching TV a true pleasure. This paragraph
describes these features. Please also read chapter 7 to get familiar with the menu of your new receiver.

6.1 Changing channels

There are different ways to change channels with your new receiver.
Via direct access
Via the channel list
Via the pq buttons
Via the RECAll button
6.1.1 direct access
To gain direct access to a certain channel, simply enter its number with the 0~9 keys on the remote
control. Channel numbers can be up to four digits long. Entering a number with less than four digits is
possible. Just wait a few seconds and your receiver will switch to the selected channel.
6.1.2 Channel list
Press ok in viewing mode to display the channel list. Use pq to highlight your channel of choice and
press ok once to select the highlighted channel. The channel list is equipped with a Find function to
make it easier to find channels. In the channel list, press REd and an alphabet banner will be displayed.
Use pq to select the first letter (or letters) of your channel of choice and ok to confirm. All channels
beginning with the chosen letter(s) will now be displayed. Close the alphabet banner by moving the
highlight to ok. Now press ok and select the channel in the filtered list.
The following buttons are available in the channel list and in viewing mode:
REd:
Tv/RAdIo:
goTo:
In viewing mode:
fAvouRITE:
6.1.3 using the pq buttons
p will switch to a higher channel.
q will switch a lower channel.
6.1.4 using the RECAll button
Use the RECAll button for switching between the last viewed channels. Please refer to section 7.6 for
more details.

6.2 Info banner

At any time during viewing mode you can press the Info button to get information about the current
channel as well as the current and following programme*. Press Info twice to view detailed info of
current and following programmes and technical details about the current channel. Press Info again or
EXIT to close the information.
8
Opens an alphabet banner to quickly find a channel
Toggles between TV and radio channels
Opens the Satellite List for satellite selection
To switch to one of the available favourite lists.
PART 1 • English