Picture - Strong SRT 7002 User Manual

3. To store the changes and exit the menu, press EXIT.
7.1.2 EPg (Electronic Programme guide)
Please refer to section 6.8 above.
7.1.3 sort
Here you can sort your channels in the following orders:
Default
By Service Name
By Frequency
By Encrypt

7.2 Picture

Press mEnu, then select Picture. The menu provides options to adjust the video settings. Press pq to
select an option and tu to adjust the setting. Press EXIT to exit the menu.
Aspect Ratio
The default and recommended format is Auto. You can also set the display format to available settings
like 4:3 Full Screen, 4:3 Pan&Scan, 4:3 Letter Box and 16:9 Wide Screen.
4:3 Letter Box:
4:3 Pan&Scan:
4:3 Full Screen:
16:9 Wide Screen:
TIP: You can change the video output format directly from viewing mode by pressing the
YELLOW button on the remote control.
Resolution
If the video does not appear correctly, change the setting. These settings match the most common
settings for HDMI.
480i:
480p:
576i:
576p:
720p:
1080i:
1080p:
TIP: You can change the video resolution directly from viewing mode by pressing the GREEN
button on the remote control.
Tv format
Set the standard corresponding to your TV set. Available options are: PAL and NTSC.
12
Sort the channels in the original order
Sort the channels in alphabetical order (A-Z)
Sort the channels in frequency order (Low-High)
Sort the channels from free to scrambled
The full 16:9 picture will be displayed on your 4:3 TV set with black bars above
and below the picture.
The centre of the 16:9 picture will be displayed full-screen on your 4:3 TV
Combination of Letter-box and Pan&Scan.
Select when using a 16:9 TV set.
for NTSC system TV.
for NTSC system TV.
for PAL system TV.
for PAL system TV.
for NTSC or PAL system TV.
for NTSC or PAL system TV.
for NTSC or PAL system TV.
PART 1 • English