Installing The Batteries - Strong SRT 7002 User Manual

PART 1 • English
10. EXIT
11. tu
12. pq
13. ok
14. fAvouRITE
15. Tv/RAdIo
16. 0-9
17. RECAll
18. goTo
19. 5
20. 6
21. 7
22. 8
23. u
24. 2
25. 3
26. REPEAT
27. REd
28. gREEn
29. YElloW
30. bluE

2.5 Installing the batteries

Remove the battery cover from the remote control and put 2x AAA size batteries inside the compartment.
The diagram inside the battery compartment shows the correct way to install the batteries.
Go back one step in the menu/cancellation of current process/exit
from main menu to viewing mode
Decreasing/increasing the volume level in viewing mode/navigating
through the menus/changing values of settings in a menu
Switches to the next/previous channel in viewing mode, switches to
the next/previous page in channel list or moving the highlight up/
down in the menu.
Viewing mode: Displays the channel list.
Menu: activation of the highlighted item
To access your favourite channels. Toggles between available
favourite groups
Toggles between TV and radio mode
Channel number and numeric value input
To switch between the last viewed channels.
In TV mode: shows the list of installed satellites for selecting their
channel lists.
In playback mode: opens the time banner for selection the moment
where to jump.
Searches backwards during playback. Each pressing increases the
speed (x2 – x32)
Searches forwards during playback. Each pressing increases the speed
(x2 – x32)
Jumps to the previous file during playback.
Jumps to the next file during playback.
Starts/resumes the playback.
Freezes/resumes the playback of multimedia files.
Stops playback of multimedia files.
Selects different repeat modes during playback
In viewing mode: fast search of channels; flexible functions in the OSD
menu and Teletext
In viewing mode: changes resolution of HDMI output between 1080p,
1080i, 720p, 576p and 576i; flexible functions in the OSD menu
and Teletext.
In viewing mode: changes aspect ratio and aspect conversion of Video
outputs; flexible functions in the OSD menu and Teletext.
In viewing mode: displays the schedule menu for easy setup timers;
flexible functions in the OSD menu and Teletext.
Fig. 4
5