Clutch - BMW S 1000 RR Rider's Manual

Hold slipstream deflector 2 in
position, making sure that it is
the correct part for the side of
the motorcycle on which you
are working.
The letter "R" for right or "L"
for left is stamped on the back
of the slipstream deflector.
Install screws 1.

Clutch

Check the clutch
operation
Pull the clutch lever.
The pressure point must be
clearly perceptible.
If the pressure point is not clearly
perceptible:
Have the clutch checked by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Checking clutch-lever
play
Pull clutch lever 1 until resist-
ance is perceptible.
In this position, measure clutch
play a between the handlebar
fitting and the clutch lever.
Clutch-lever play
0.5...1.0 mm (at the handle-
bar fitting, with engine cold)
Clutch play is out of tolerance:
Adjust the clutch-lever play
( 118).
9
117
z