BMW S 1000 RR Rider's Manual page 128

brake-caliper carrier 10 back
9
far enough to allow the rear
wheel to clear it.
126
The sprocket and the
spacer sleeves on left
and right are loose fits in the
wheel. Make sure that these
parts are not damaged or lost on
removal.
Install the rear wheel
Possible malfunctions when
ABS and DTC systems in-
z
tervene if non-standard wheels
are installed.
See the information on the effect
of wheel size on the ABS and
DTC systems at the start of this
chapter.
Threaded fasteners not
tightened to the specified
torque can work loose or their
threads can suffer damage.
Always have the security of the
fasteners checked by a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Roll the rear wheel on the sup-
port into the swinging arm as
far as necessary to permit the
brake-caliper carrier to be in-
serted.
Insert the brake-caliper carrier
into guide 11.
When rolling the rear wheel
into position, take care not to
damage ABS sensor 9.
Roll the rear wheel further into
the swinging arm, while push-