Turn Indicators; Hazard Warning Flashers - BMW S 1000 RR Rider's Manual

Turn indicators

Operating flashing turn
indicators
Switch on the ignition.
The turn indicators are can-
celled automatically after
you have ridden for approximately
10 seconds and covered a dis-
tance of about 300 m.
Push button 1 to the left to
switch on the left flashing turn
indicators.
Push button 1 to the right to
switch on the right flashing turn
indicators.
Centre button 1 to cancel the
flashing turn indicators.
Hazard warning
flashers
Switching on hazard
warning flashers
Switch on the ignition.
The hazard warning flash-
ers place a strain on the
battery. Do not use the hazard
warning flashers for longer than
absolutely necessary.
If you press a turn-indic-
ator button with the ignition
switched on, the turn-indicator
function is activated instead of
the hazard warning flashers, and
remains active until you release
the button. The hazard warning
flashers recommence flashing as
soon as the button is released.
Press button 1 to switch on
the hazard warning flashers.
Ignition can be switched off.
Press button 1 again to switch
off the hazard warning flashers.
4
39
z