BMW S 1000 RR Rider's Manual page 54

4
Compression stage, ba-
sic setting, rear, high
speed
52
Position 2 (comfortable set-
ting with rider 85 kg)
Position 4 (normal setting
with rider 85 kg)
Position 9 (sports setting
with rider 85 kg)
Compression stage,
z
basic setting, rear, low
speed
Position 2 (comfortable set-
ting with rider 85 kg)
Position 4 (normal setting
with rider 85 kg)
Position 8 (sports setting
with rider 85 kg)
Adjusting rebound-stage
damping for rear wheel
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Adjust compression-stage
damping by turning adjusting
screw 1.
To increase damping: Use the
tool from the on-board kit to
turn the adjusting screw in the
appropriate direction so that
mark 2 points to a higher read-
ing on the scale.
To reduce damping: Use the
tool from the on-board kit to
turn the adjusting screw in the
appropriate direction so that
mark 2 points to a lower read-
ing on the scale.