Shifting Gear - BMW S 1000 RR Rider's Manual

Brake pads
New brake pads have to bed
down before they can achieve
their optimum friction levels. You
can compensate for this initial re-
duction in braking efficiency by
exerting greater pressure on the
levers.
New brake pads can extend
stopping distance by a sig-
nificant margin.
Apply the brakes in good time.
Tyres
New tyres have a smooth sur-
face. This must be roughened by
riding in a restrained manner at
various heel angles until the tyres
are run in. This running in pro-
cedure is essential if the tyres are
to achieve maximum grip.
Tyres do not have their full
grip when new and there
is a risk of accidents at extreme
angles of heel.
Avoid extreme angles of heel.

Shifting gear

Shift light
Shift light 1 shows the rider two
engine-speed thresholds:
Pullaway engine speed
When the motorcycle is at a
standstill with the engine running,
the shift light indicates the ideal
engine speed for a racing start.
Shift light off: engine speed
too low
Shift light on: ideal engine
speed for pulling away
Shift light flashing: engine
speed too high
Shift speed
When the motorcycle is on the
move, the shift light indicates the
engine speed at which the rider
should upshift.
Shift light flashes at preset fre-
quency: Approaching upshift
rpm
Shift light goes out: the engine
has reached the ideal speed for
an upshift
The engine-speed thresholds
and the way in which the shift
light indicates the various states
can be customised in the SETUP
menu.
Speed limit
If the shift light flashes or comes
on while the motorcycle is be-
! SPEED
ing ridden and
5
63
z
ap-