BMW S 1000 RR Rider's Manual page 138

9
136
Install screw 1.
LED rear light
If the number of LEDs in the rear
z
light that have failed exceeds the
number stated in the Technical
Data below, the rear light must
be replaced. Under these cir-
cumstances:
Seek the advice of a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Maximum number of de-
fective LEDs in rear-light
unit
1
Replacing number-plate
light
Pull number-plate light 1 out of
the bulb housing.
Pull the bulb out of the bulb
socket.
Replace the defective bulb.
Bulb for number-plate
light
W5W / 12 V / 5 W
Use a clean, dry cloth to hold
the new bulb in order to keep
the glass free of foreign matter.