Ride Mode - BMW S 1000 RR Rider's Manual

Activating DTC function
Press and hold down button 1
until DTC warning light 3
changes status.
DTC warning light goes
out; if self-diagnosis has not
completed it starts flashing.
Release button 1 within two
seconds.
DTC warning light remains
off or continues to flash.
The DTC function is activated.
If the coding plug for the
SLICK function is not inserted,
you have the option of
switching the ignition off and
then on again.
A DTC fault has occurred
if the DTC warning light
shows when the motorcycle ac-
celerates to a speed in excess
of 5 km/h after the ignition was
switched off and then on again.

Ride mode

Setting riding mode
Switch on the ignition.
Press button 1.
See the section entitled
"Engineering details"
for more information on the
various ride modes that can be
selected.
Arrow 1 and selection menu 2
show. The current setting is
shown at position 3.
4
43
z