Front And Rear Seats - BMW S 1000 RR Rider's Manual

Headlight beam throw and
4
spring preload
Headlight beam throw is gener-
54
ally kept constant when spring
preload is adjusted to suit load.
Consult a specialist work-
shop, preferably an au-
thorised BMW Motorrad dealer,
if you are unsure whether the
headlight beam-throw setting is
correct.
z

Front and rear seats

Removing rear seat
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Open seat lock 1 with the igni-
tion key.
Lift the rear seat at the rear
and then work it back and up
to remove.
Remove the ignition key from
the lock and place the rear
seat, upholstered side down,
on a clean surface.
Installing rear seat
Engage the rear seat in
mounts 2 on left and right.
Swing the rear seat down,
pushing it lightly forward.