Installing Battery - BMW S 1000 RR Rider's Manual

Remove the front seat (
9
140
Disconnection in the wrong
sequence increases the risk
z
of short-circuits.
Always proceed in the correct
sequence.
Disconnect negative lead 1
first.
Then disconnect positive
lead 2.
Connecting battery to
55).
motorcycle
Connect battery positive lead 2
first.
Then connect battery negative
lead 1.
Installing front seat (
Recharge the battery
Disconnecting battery from
motorcycle (
Charge the battery using a
suitable charger.
Comply with the operating in-
structions of the charger.
Once the battery is fully
charged, disconnect the
charger's terminal clips from
the battery terminals.
in the course of a lengthy period
of disuse. See the instructions
for caring for your battery. Al-
ways fully recharge the battery
before restoring it to use
Connecting battery to motor-
cycle (
Remove the battery
Disconnecting battery from
55).
motorcycle (
Lift the battery up and out;
work it slightly back and forth
if it is difficult to remove.
139).

Installing battery

for a prolonged period of time
it will be necessary to enter the
The battery has to be re-
charged at regular intervals
140).
139).
If the battery was discon-
nected from the motorcycle