BMW S 1000 RR Rider's Manual page 70

5
68
Remove screws 1 and remove
z
the cover panel of the bottom
fork bridge.
The motorcycle can topple
and fall on its side.
Make sure that the motorcycle
cannot topple sideways.
Push the motorcycle onto the
transportation flat and hold it in
position: do not place it on the
side stand.
Risk of damaging compon-
ents.
Take care not to trap
components such as brake lines
or wires.
At the front, loop a strap over
the bottom fork bridge on each
side.
Pull the straps down and tight.
At the rear, secure the straps
to the rear footrests on both
sides and tighten the straps.
Tighten all the straps uniformly;
the motorcycle's suspension
should be compressed as
tightly as possible front and
rear.