BMW S 1000 RR Rider's Manual page 94

6
92
Carefully disengage anti-theft
alarm bracket 5 from the rear
frame and turn it up.
z
Open retainer 6 and discon-
nect the plug.
Use a small screwdriver to
push retainer 7 to the left and
at the same time push the plug
to the rear and off the anti-
theft alarm bracket.
Remove the anti-theft alarm
bracket.
Protect the plug on the motor-
cycle to prevent the ingress of
foreign matter.
Remove screws 8 with wash-
ers and remove the number-
plate carrier. Work the cable
through opening 9.
Install the rear seat (
Installing number-plate
carrier
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Remove the rear seat (
54).
54).