BMW S 1000 RR Rider's Manual page 47

Installing coding plug
Switch off the ignition.
with reduced power output, 79
OE
kW
The following applies to
motorcycles with power re-
duction: Once the coding plug
has been inserted, the choice
of modes includes SPORT and
RACE with increased engine
power. The significantly more
sporty response in these modes
can lead to hazardous situations.
It is important for the rider in-
tending to use these more sporty
ride modes to familiarise himself/
herself with their characteristics.
The following applies to
motorcycles with power
reduction: Inserting the cod-
ing plug voids homologation for
riding the motorcycle on public
roads.
In these cases, do not insert the
coding plug for riding on public
roads.
Switch off the ignition.
Remove the front seat (
Dirt and moisture can pen-
etrate the open plug and
lead to malfunctions.
Reinstall the cap after removing
the coding plug.
Remove cap of plug 1.
55).
To do so, press retainer 2 and
pull the cap up.
Install the coding plug.
Switch on the ignition.
Once the coding plug is inserted
RAIN mode 1 is the mode ac-
4
45
z