Running In - BMW S 1000 RR Rider's Manual

Phase 1
5
Test of the diagnosis-compat-
ible system components with
62
the vehicle at a standstill.
DTC warning light slow-
flashes.
Phase 2
Test of the diagnosis-compat-
ible system components while
z
the motorcycle is on the move.
The motorcycle must reach a
speed of at least 5 km/h in or-
der for DTC self-diagnosis to
complete.
DTC warning light slow-
flashes.
DTC self-diagnosis
completed
The DTC symbol no longer
shows.
If an indicator showing a DTC
fault appears after DTC self-dia-
gnosis completes:
You can continue to ride. Bear
in mind that the DTC function
is not available.
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.

Running in

Engine
Until the first inspection,
vary the throttle opening and
engine-speed range frequently;
avoid riding at constant engine
rpm for prolonged periods.
Try to do most of your rid-
ing during this initial period on
twisting, fairly hilly roads.
Comply with the rpm limits for

running in.

The electronic engine man-
agement system prevents
the engine from revving past the
preset rpm limit for running in.
The authorised BMW Motorrad
dealer deactivates this monit-
oring function when the motor-
cycle is brought in for its initial
inspection.
Running-in speed
-1
<7000 min (Odometer
reading 0...300 km)
-1
<9000 min (Odometer
reading 300...1000 km)
no full load (Odometer read-
ing 0...1000 km)
Do not omit the first inspection
after 500 - 1200 km.