Table of Contents
Advertisement
Chapter 6 Video and Audio Adjustments
Display Modes
Different display modes are available during a videoconference.
Local - your party
Remote - the other party
Data - image of the screen display from the computer that opened a data
connection to the HD3000.
To switch between viewing Local and Remote video
Press <Display> on the remote control.
Muting the Outgoing Video
You can mute the local outgoing video if you want to stop sending video
temporarily. The remote party then sees a frozen video image until you unmute it.
Muting the video does not affect the video or audio from the remote party. If you
want to mute the audio also, see
To mute the video
Press <Mute Video>. An animated icon at the bottom of the screen
indicates that the outgoing video is frozen.
To unmute the video
Press <Mute Video> again.
84
"Adjusting the Volume" on page
Emblaze VCON HD3000 User's Guide
88.
Advertisement
Table of Contents
Need help?
Do you have a question about the HD3000 and is the answer not in the manual?