Table of Contents
Advertisement
Chapter 1 Welcome to HD3000
1.2
HD3000 System Components
The HD3000, consisting of a main unit and remote control set, joins with separately
purchased display monitor(s) to constitute a complete set-top conferencing
appliance. Optional accessories are available for enhancing the abilities of the
standard system (see
preinstalled.
HD3000 Main Unit
The Main Unit contains the video card, software for operating the system, a built-in
Pan/Tilt/Zoom (PTZ) camera, and various connectors located on the rear panel for
connecting the other components and accessories.
The PTZ camera is controlled through the system software, either from the hand-
held remote control or from a remote PC using the Web-based Management
program. You can pan, tilt and zoom the camera in a wide range of directions
during videoconferences. Up to six pre-set positions can be set for instant recall
through the remote control.
Remote Control
The hand-held remote control provides quick and easy access to all functions.
Infrared signals are sent out from the bulb at the top of the remote control and are
picked up by the sensor on the HD3000 unit.
For details about the remote control buttons, see
6
"Additional Accessories" on page
7). The software is
"The Remote Control" on page
Emblaze VCON HD3000 User's Guide
37.
Advertisement
Table of Contents
