Getting Started; Starting And Shutting Down Hd3000 - Emblaze-VCON HD3000 User Manual

3 G
ETTING
This chapter explains how to operate HD3000 and to make a call. It includes the
following sections:

Starting and Shutting Down HD3000

The Remote Control
HD3000 Screens
Navigating in HD3000
Setting up the Network Configuration
Starting a Videoconference from the Manual Dialer
3.1 Starting and Shutting Down HD3000
Make sure the system is set up, the TV monitor is on, and the cables are connected
properly. See "Connecting the Basic Components" on page
To start up HD3000
1. On the back of the Main Unit, press the POWER button on, marked (I).
2. Wait until the HD3000 Ready Screen appears, and HD3000 is ready to
make and receive calls.
If the Ready Screen does not appear after 1 minute from the time you started
the system, see Chapter 15, "Troubleshooting".
Emblaze VCON HD3000 User's Guide
S
TARTED
Ready Screen
10.
35