Upgrading From The Hd3000; Automatically Checking For Upgrade - Emblaze-VCON HD3000 User Manual

Group videoconferencing systems

Table of Contents

B.2

Upgrading from the HD3000

Alternatively, you may upgrade the HD3000 software directly from the HD3000.

Checking for upgrade can be done automatically or at your own initiative.

To upgrade through the HD3000, the system's LAN configuration must

be set up completely - all parameters must be defined (see

Connection" on page

Automatic Checking for Upgrade enables the HD3000 to check the FTP site for a

new software version whenever the system restarts.

To set up automatic upgrading

Press <Menu>. The main Menu appears. Select Versions.

Select Version.

Navigate to the Upgrade dialog box.

Select Automatically Check for Upgrade. The HD3000 will check the

FTP site for a new software version whenever the system restarts.

The Check for Upgrade box commands the HD3000 to check for the

upgrade after a specific period, IF the system has not restarted during the

interim. Enter the number of days in this period.

Emblaze VCON HD3000 User's Guide

65).

Appendix B Software Upgrade

"LAN

159

Table of Contents

Do you have a question about the HD3000 and is the answer not in the manual?