Table of Contents
Advertisement
Connecting to an Electrical Source
After connecting the HD3000 to the accessories, connect the system to the power
supply. A 100-250VAC/50-60Hz universal power supply is supplied in the
HD3000 package.
To connect the HD3000 to a power supply
1.
Insert the power supply's DIN connector (6-pin) to the DC Input socket on
the rear of the system.
2.
Insert the power cable plug into the receptacle on the power supply.
3.
Insert the other plug of the power cable into a grounded AC wall socket.
Connecting HD3000 to the Electrical Power Source
Emblaze VCON HD3000 User's Guide
Chapter 2 Setting Up HD3000
23
Advertisement
Table of Contents
Need help?
Do you have a question about the HD3000 and is the answer not in the manual?