Controlling The Camera - Emblaze-VCON HD3000 User Manual

3. During a conference with a party who enabled FECC, press
the down arrow key to view the remote camera selection
options.
4. Press the left or right arrow buttons to switch between the
remote video sources.
5. Press <OK> to select the highlighted camera (and the selected
Local camera) and close the dialog box.

Controlling the Camera

You can position the HD3000's main camera at any time, either prior to or during a
call. You can pan, tilt, and zoom the camera every time you want to change the
local display, or you can save preset positions.
Positioning the Camera
When the screen is clear of dialog boxes, either in or out of a videoconference, you
can control the camera in various ways:
Manual positioning - temporarily positioning the camera as required.
Preset positioning - focusing the camera on a specific person or location, then
saving the position and recalling it when needed.
Far-end camera control.
To manually position the camera
To pan the camera left and right, press the left and right arrow
keys. To tilt it up and down, press the up and down arrow
keys.
To zoom in and out, press the <+> and <-> of the Zoom button.
Emblaze VCON HD3000 User's Guide
Chapter 6 Video and Audio Adjustments
OK
81