Emblaze-VCON HD3000 User Manual page 79

Presence in online directories (LDAP).
HD3000 software version upgrade from the MXM Administrator.
In the H.323 tab, choose to register the HD3000 in an Emblaze VCON MXM or in
an H.323 Gatekeeper.
None;
Gatekeeper;
MXM
MXM Server IP
Gatekeeper IP
User Number
Station Name
Emblaze VCON HD3000 User's Guide
To register with the MXM or a Gatekeeper and receive
services from them, select the appropriate option. Select
None to operate HD3000 as a stand-alone system.
Enter the IP address of the MXM, if applicable.
Enter the IP address of the Gatekeeper, if applicable.
Videoconferencing contacts registered with the same
MXM or other Gatekeepers will be able to dial using
your User Number as well as your IP address.
Enter a number to register HD3000 with the MXM or
Gatekeeper. Some of these devices may register your
device under this number, while others assign these
numbers, regardless of your request.
The Station Name is the identification of the HD3000 on
the connected network. Consult with the system
administrator before modifying this box.
If the system is registered with the WINS server or a
Gatekeeper, HD3000 can use station names instead of IP
addresses for starting and receiving calls. When you
register with a Gatekeeper, the station name is entered as
your User Name.
If the system has access to a Domain Name System
(DNS) server, the Station Name is also the DNS Host
Name of the system. Enter the Host Name, then a dot,
then the Domain Name: StationName.Domain.com (see
"Entering Data" on page 40
alphanumerical data from the keyboard).
Chapter 5 Network Configuration
for instructions on entering
67