Emblaze-VCON HD3000 User Manual page 170

Appendix B Software Upgrade
3. If applicable, enter the Password defined in the HD3000's Security
settings (see
4. Click Browse to select the upgrade file that you previously downloaded
from the Emblaze VCON website.
5. Click Start.
CAUTION The entire procedure takes several minutes. Do not restart
When the upgrade installation finishes, the HD3000 restarts.
6. When the HD3000 is ready again, verify that the new version was
installed correctly. Press <Menu>. The main Menu appears. Select
Versions.
Select Version.
7. Check that the Software Version matches the downloaded filename.
158
"Setting a Security Password" on page
HD3000 until the upgrade process is complete!
Emblaze VCON HD3000 User's Guide
141).
Menu