Emblaze-VCON HD3000 User Manual page 146

Chapter 12 Telephony Exchange Functions
For this feature
Forward on
busy
Unconditional
forward
To disable Call Forwarding
In the LAN Manual Dialer, dial one of the following (bold values are
factory defaults):
To disable this
feature
Forward on no
answer
Forward on
busy
Unconditional
forward
After dialing, a "Call Rejected" message appears. However, the request is
accepted by the MXM if the directory number is valid.
134
Dial this number
*71 (or other code number), followed by [other
destination directory number], and then press
<Dial>.
Activate if you want to forward calls to another
specific user if you are engaged in another
videoconference.
For example, *71751+<Dial>will forward calls to
user 751.
*72 (or other code number), followed by [other
destination directory number], and then press
<Dial>.
Activate if you want to forward ALL calls
intended for you to another specific user.
For example, *72751+<Dial>will forward calls to
user 751.
Dial this number
*70* (or other code number), and then press
<Dial>.
*71* (or other code number), and then press
<Dial>.
*72* (or other code number), and then press
<Dial>.
Emblaze VCON HD3000 User's Guide