Emblaze-VCON HD3000 User Manual page 83

Priority Values
Select the type of QOS Priority
used by your system.
Enter appropriate
Priority Values.
2. To return to the default QoS values, press the blue RESET SoftKey.
3. Press <OK> to save the QoS settings and close the dialog box.
For best results, it is recommended that RTCP packets receive the highest
priority, to ensure that QoS features continue to operate during the entire
call.
Audio packets should receive a higher priority than video packets, as a
meeting can continue without video, but not without audio.
Emblaze VCON HD3000 User's Guide
For Video, Audio, and RTCP (Real Time Control
Protocol) Priority, enter an appropriate priority level.
According to their priority levels, bits are queued for
forwarding by QoS-supporting routers.
The priority levels vary, depending on whether the
selected Priority Type is IP Precedence or Diffserv.
Chapter 5 Network Configuration
OK
71