Chapter
3
Operational Procedures
6. Pull the new paper above and behind the ribbon mask, but in front of the
existing paper. See Figure 4 on page 19 for the ribbon mask location.
If necessary, gently press the existing paper back.
7. Align the top edge of the new paper with the top perforation of the existing
paper.
8. Load the new paper over the existing paper. Open and load the tractors
one at a time to prevent the paper from slipping.
NOTE: Make sure that the top edge of the new paper lines up with the top
28
New Paper
Figure 7. Loading New Paper into the Printer
horizontal perforation of the last page.
Existing Paper