Active Igp Emul - (N7000 Std); Emulation - Printronix N7000 H-Series User Manual

Chapter 4

ACTIVE IGP EMUL - (N7000 STD)

ACTIVE IGP EMUL - (N7000 STD)
This ACTIVE IGP EMUL function allows you to activate the desired emulation.
There are two methods for selecting the desired emulation. The first is by
selecting the emulation directly from the printer menu. The second is by
sending a host command which will switch the emulation automatically (see
the appropriate Programmer's Reference Manual for details).
When changing from one emulation to the other, the printer will load the
power-up configuration and the new emulation parameters. Any configuration
settings performed before selecting these emulations that are not saved in
NVRAM will be lost.
IMPORTANT
To configure an IGP emulation, the IGP emulation must be selected in
the ACTIVE IGP EMUL menu. The IGP emulation that is not selected will
not appear in the EMULATION menu (see "Main Menu" on page 57).

EMULATION

The EMULATION menu allows you to select the emulation to be used with
your printer. The Proprinter XL, Epson FX, P-Series, P-Series XQ, and Serial
Matrix emulations are all part of LinePrinter +. You can configure options for
the active emulation via the EMULATION menu. Emulation options are further
described in their corresponding Programmer's Reference Manual.
EMULATION
(from page 58)
LinePrinter+
page 85 and
page 109
84
ACTIVE IGP
EMUL
(from page 58)
IGP/PGL*
IGP/VGL
1
IGP/PGL IGP/VGL
page 122 page 134
* = Factory Default
* = Factory Default
1
Optional Emulation with N7000 STD
1