Table of Contents
Advertisement
Set Lock Key
Normally, to lock or unlock the printer menu, the UP and DOWN keys are
pressed at the same time. The Set Lock Key parameter lets you choose
different keys to lock or unlock the printer menu. You may choose almost any
group of keys as the new lock and unlock keys. You cannot use the ENTER
key or any key combinations which are already used for another function.
There is no limit to how many keys you can select.
To set the new lock key, follow these steps:
1. Work your way through the configuration menu until the display reads
"Set Lock Key" (follow the menu structure on page 148).
2. Press ENTER. The display reads, "Select a new lock key."
3. Press the combination of keys you want to be the new lock key. Make
sure you press all keys selected at the same time.
4. If the selection is valid, the display will read, "Enter the new lock key
again." If the selection is invalid, the display will read, "Invalid key
selection." Return to step 2 and start over.
5. Press the same combination of keys a second time. If the new lock key
combination is entered again correctly, the display will read, "Lock key
has been changed." If it was entered incorrectly, the display will read
"Verification failed." Start over at step 2.
6. After entering the new lock combination successfully, press the ON LINE
key to put the printer back online.
NOTE: The new lock combination will remain even if the printer is powered
off and back on.
Job Sel/Typeface On
Allows you to customize this key to either function as Job Select or Typeface
Select.
•
Job-Select On (default). In offline mode, JOB SELECT allows you to
change the active configuration without having to navigate the
configuration menu. When pressed, the display reads "Load Config" with
the name or number of the currently loaded configuration. Press JOB
SELECT again until the configuration you want to load displays. Press
ENTER and "Loading Saved Configuration" displays. The selected
configuration is loaded into memory and becomes the active
configuration. Press ON LINE to return to online mode.
•
Typeface On. Sets the typeface of the printer. This key requires
confirmation with the ENTER key.
Print Hist. Log
Prints the "Font File Log Report" if a custom font is downloaded.
DIAGNOSTICS
IGP/VGL Submenu
153
Advertisement
Table of Contents
