Sounds; Enabling And Disabling Sounds; Enabling And Disabling Sounds For Specific Events - Sierra Wireless Clear Spot 4G+ User Manual

Rev 1.0 Apr.10

Sounds

Enabling and Disabling Sounds

You can enable or disable sounds of the device through:
• The mute switch on the device (disables all sounds). See
page 36.
• The browser interface (selectively disables sounds). See
and Settings" on page 58
Events" on page 73.

Enabling and Disabling Sounds for Specific Events

1. Log in to the home page.
Advanced settings
2. Click
Device > Sounds
3. Click
4. Next to each of the event types, select
Sounds for the following events can be individually enabled or disabled:
Low Battery
•
Useful as a reminder to charge the device. In the
select a battery level to trigger the alert.
System Alerts
•
When you hear the device beep, use the device LCD or the Alerts window to
get information about the alert. See
Note: System alerts include several types of events, for example:
• Critical battery
• Critical temperature
• Software update available
• Network update available
• Routing hardware settings reset
• Device startup failure
Internet Connected
•
Internet Disconnected
•
Wi-Fi User Has Joined
•
Useful, for example, if you're the only one using the device, to detect an
intruder.
Wi-Fi User Has Left
•
Last User Has Left
•
You can turn off the device if nobody will be using it for a while.
and "Enabling and Disabling Sounds for Specific
( ).
.
Enable
"Alert Information" on page
Settings
"Mute Switch"
"Sounds Information
Disable
or .
Alert When
list, you can
54.
on
73