Table of Contents
Advertisement
Clear Spot 4G+ User Guide
32
Using the AC Charger with USB Port
1. Insert the smaller (Micro B) end of the USB cable into the USB connector on
the side of the device.
2. Insert the other (USB) end of the USB cable into the power adapter.
3. Insert the power adapter into an electrical outlet.
When charging, the LCD shows
"Charging... xx% complete".
When the device is charged, the LCD shows:
•
(if the device is on)
•
and the message "Fully charged" (if the device is off).
Charging Through a Computer
Note: Charging through a computer usually takes longer than charging through the power
adapter.
Note: If you'll be using USB for data transfer (and not just for charging the device), you
must install the device driver. See
and, if the device is off, displays a message
"Making a Tethered Connection" on page 43
.
2131352
Advertisement
Table of Contents
