Table of Contents
Advertisement
Clear Spot 4G+ User Guide
88
Wi-Fi Password Reminder
When the Wi-Fi Password Reminder feature is enabled, you can display the Wi-Fi
password on the LCD of the device:
1. If the LCD is dark (no text or icons are displayed):
a. Ensure the LCD is enabled. See
b. Briefly press the power button
2. Press the power button
The information is displayed for approximately 20 seconds. To clear the
information before that, briefly press the power button
Enabling the Wi-Fi Password Reminder
1. Log in to the home page.
Advanced settings
2. Click
Wi-Fi > Security
3. Click
Password Reminder
4. In the
Save
5. Click
.
Allowing or Denying Computers Access to the Network
The MAC (Media Access Control) filter is used to grant ("whitelist") or block
("blacklist") wireless devices access to the Wi-Fi, 3G, and 4G networks. Access is
based on the MAC address of each wireless device.
MAC filtering can prevent unauthorized wireless devices from connecting to your
network.
You can choose one of three modes:
No filtering
•
— All computers are allowed to access the network.
Allow all in list
•
— Only computers that are in this list are allowed to access the
network.
Block all in list
•
— All computers are allowed to access the network, unless
they're in this list.
In any case, a user still needs to provide the correct Wi-Fi password to access the
network.
Specifying Computers That Can Access the Network
1. Log in to the home page.
Advanced settings
2. Click
Wi-Fi > MAC Filter
3. Click
MAC Filter Mode
4. In the
5. Do one of the following:
•
If the computer you want to allow access is currently connected to the Clear
Spot 4G+ personal hotspot, click
In the row for the computer, click
"Turning the LCD On or Off" on page
on the device.
on the device twice, quickly (within 0.5 seconds).
(
).
.
On
section, select
(
).
.
Allow all in list
list, click
List of connected devices
Add
.
on the device.
.
.
.
71.
2131352
Advertisement
Table of Contents
