Table of Contents
Advertisement
Clear Spot 4G+ User Guide
84
From this window, you can:
•
Display a list of computers that are:
· Allowed to access the network (
· Not allowed to access the network (
•
Add or remove a computer from the lists. See
Can Access the Network" on page 88
Not Allowed to Access the Network" on page
•
Display a list of computers that are currently connected through Wi-Fi. See
"Displaying a List of Currently Connected Computers" on page
Configuring the Wi-Fi Network
You can configure basic settings of the Wi-Fi network through the setup pages.
1. Ensure you're logged in to the home page.
Admin setup
2. Click
(
For more information, see
You can configure basic and advanced settings of the Wi-Fi network through the
Advanced settings
window.
1. Log in to the home page.
Advanced settings
2. Click
Wi-Fi > Network
3. Click
For more information, see
See also:
•
"Disabling Wi-Fi When Connected Through USB" on page
•
"Battery and USB Power Settings" on page
•
"AC Power Settings" on page 71
SSID (Wi-Fi Network Name)
The SSID identifies your Wi-Fi network and is visible to other Wi-Fi-enabled
devices.
It appears on your device's LCD screen; if more than one Clear Spot 4G+
personal hotspot is available, you can use this name to tell the devices apart.
You can display the home page by typing the SSID in your Web browser (if
SSID and Hostname
is selected; see
page
85).
You should make the SSID unique and change it on a regular basis for optimal
security.
MAC Filter Mode
MAC Filter Mode
and
"Specifying Computers That Are
).
"Changing the Password and Settings"
(
).
.
"Network Panel" on page
"Linking the SSID and the Host Name" on
= "Allow all in list")
= "Block all in list")
"Specifying Computers That
89.
90.
on page 38.
82.
91.
71.
Link
2131352
Advertisement
Table of Contents
