Table of Contents
Advertisement
Rev 1.0 Apr.10
Standby Timer on Battery or USB
•
power) mode. See
Check for Updates
•
automatically and
Checking for Updates"
page
65.
TRU-Install
•
— Installs the necessary drivers the first time you connect the
Clear Spot 4G+ personal hotspot to your Windows or Mac computer. For
information on this feature, see
Display Panel
Display
From the
panel of the
LCD.
1. Log in to the home page.
Advanced settings
2. Click
Device > Display
3. Click
From this window, you can view or adjust these settings:
•
Lighting of the power button
"Enabling and Disabling the LED" on page
•
Turn the LCD on or off (
page
71.
•
LCD timeout — how soon the LCD goes dormant (Turn Off Backlight). See
"Setting the LCD Timeout" on page
•
Brightness of the LCD (
on page
72.
microSD Card Panel
1. Log in to the home page.
Advanced settings
2. Click
Device > microSD Card
3. Click
From this window, you can view and adjust settings, or perform the following
actions:
•
Status of the microSD card slot.
•
Enable the microSD card slot. See
page
61.
•
Folder name for the shared micro SD card. See
Name" on page
61.
•
Set up access to the microSD Card. See
Card" on page
61.
Sounds Panel
From the Sounds panel of the
specific types of events.
1. Log in to the home page.
On AC Power
and
"Standby (Low Power) Mode" on page
Check for updates now
on page 64 and
"Manually Checking for Updates" on
"TRU-Install"
Device
tab, you can configure settings for the device
(
).
.
on the device (
LCD Backlight
). See
72.
Backlight Settings
). See
(
).
.
"Enabling the microSD Card Slot" on
"Setting Up Access to the microSD
Device
tab, you can enable or disable sounds for
— Enable standby (low
56.
. See
"Automatically
on page 43.
Power Button LED
). See
72.
"Turning the LCD On or Off" on
"Setting the LCD Brightness"
"microSD Shared Folder
Settings
77
Advertisement
Table of Contents
