Activating And Using Your Network Service - Sierra Wireless Clear Spot 4G+ User Manual

Clear Spot 4G+ User Guide
40
Lower security. Works with older and newer Wi-Fi devices. Recommended
only if any of your devices don't support WPA or WPA2.
Open WEP uses the key for encryption, but not for authentication.
WEP-128 Bit - Open
•
Lower security. Works with older and newer Wi-Fi devices. Recommended
only if any of your devices don't support WPA or WPA2.
Open WEP uses the key for encryption, but not for authentication.
WPA-Personal - TKIP
•
A strong security standard, supported by most Wi-Fi devices.
WPA-Personal - TKIP/AES
•
A strong security standard, supported by most Wi-Fi devices.
WPA2-Personal - AES
•
A stronger, newer security standard. Limited to newer Wi-Fi devices.
WPA2-Personal - TKIP/AES
•
A stronger, newer security standard. Limited to newer Wi-Fi devices.
WPA/WPA2 Personal
•
Wi-Fi devices that use either WPA or WPA2 can connect to the device. Sup-
ported by most Wi-Fi devices.
Your Device is Now Restarting
The "Your device is now restarting" window opens if you've clicked the
Clear Spot 4G+
option and then clicked
The changes take effect after the device restarts automatically.
It's recommended you write down the following information that's displayed in the
window:
• Wi-Fi network name
• Wi-Fi password
As described in the window,
1. Wait until the device LCD displays "Connect your computer to Wi-Fi Network".
2. Connect your computer to the Wi-Fi network, using the information you've
written down. (If you don't know how to do this, see
Wi-Fi?" on page 110).
3. After the Wi-Fi connection was successfully established, click the
text in the window.

Activating and Using Your Network Service

Note: If you're able to connect to 3G, you are already set up to use CLEAR service on the
3G network; no further action is needed. Proceed to
Before using your device, you must have a CLEAR wireless network account set
up. The process of setting up an account is called
starts up, it will detect whether the device has been configured with an account
("preactivated"). If it has not, the activation process starts automatically.
(recommended setting)
Submit
.
"Using Your Device" on page 43
Set up my
"How Do I Connect to
Click here
activation
. When the device
2131352
.