Setting The Method Used For Time Acquisition - Sierra Wireless Clear Spot 4G+ User Manual

Rev 1.0 Apr.10
The following system events are always logged:
• Intrusion alerts
• Unexpected power loss
• Critical battery
• Critical temperature
• Routing hardware settings reset
• Firmware update
Enabling and Disabling Logging of System Events
1. Log in to the home page.
Advanced settings
2. Click
Device > Log
3. Click .
Verbose System Event Logging
4. In the
save
5. Click .
Note: Certain events are always logged; see
Exporting System Events
1. Log in to the home page.
Advanced settings
2. Click
Device > Log
3. Click .
Verbose System Event Logging
4. Ensure
Export
5. Click .
Clearing the System Events Log
1. Log in to the home page.
Advanced settings
2. Click
Device > Log
3. Click .
Verbose System Event Logging
4. Ensure
Clear log
5. Click .

Setting the Method Used for Time Acquisition

Time information is stored in the connection history log and system events log.
To set the method used for obtaining the time:
1. Log in to the home page.
Advanced settings
2. Click
Device > Log
3. Click .
( ).
section, select
"System Events" on page 106
( ).
Enable
is set to
( ).
Enable
is set to
( ).
Settings
Enable Disable
or .
.
.
.
107