Sierra Wireless Clear Spot 4G+ User Manual page 104

Clear Spot 4G+ User Guide
104
2. Find the small hole below and to the right of the battery compartment. The
reset button is inside this hole.
3. Insert a thin object (for example, the end of a paper clip) into the hole, and
lightly press on the bottom of the hole
4. Replace the battery compartment cover.
5. Check the device LCD. If it displays "Reset to factory defaults? Press
accept", press the power button
6. Follow the instructions on the device LCD.
Resetting the Software to Default Settings (Through the Browser Interface)
Warning:
If you reset the software to default settings:
• You must go through the device setup (
• Any changes you've made to the settings are lost.
Your 3G and 4G account information is not affected; after reset, the device remains provi-
sioned for service.
1. Log in to the home page.
Advanced settings
2. Click
Router > Basic
3. Click .
Router Settings Reset
4. Click
Reset button
for five or more seconds
on the device.
page 37
), as if you've just purchased the device.
( ).
.
.
to
2131352