Clear Spot 4G+ User Guide
78
Advanced settings
2. Click
Device > Sounds
3. Click
4. Next to each of the event types, select
Sounds for the following events can be individually enabled or disabled:
Low Battery
•
Useful as a reminder to charge the device. In the
select a battery level to trigger the alert.
System Alerts
•
When you hear the device beep, use the device LCD or the Alerts window to
get information about the alert. See
Note: System alerts include several types of events, for example:
• Critical battery
• Critical temperature
• Software update available
• Network update available
• Routing hardware settings reset
• Device startup failure
Internet Connected
•
Internet Disconnected
•
Wi-Fi User Has Joined
•
Useful, for example, if you're the only one using the device, to detect an
intruder.
Wi-Fi User Has Left
•
Last User Has Left
•
You can turn off the device if nobody will be using it for a while.
About Panel
1. Log in to the home page.
Advanced settings
2. Click
Device > About
3. Click
Note: 4G information is not available if
Advanced settings > WAN >
The following information is displayed:
Model Number
•
Manufacturer
•
Software Version
•
.
Firmware version for the routing hardware component of the device.
Activation Status
•
.
3G activated, or not activated.
(
).
.
Enable
"Alert Information" on page
(
).
.
WAN mode
is "3G only".
Setup.)
Disable
or
.
Alert When
list, you can
54.
(WAN mode
is in
2131352