Table of Contents
Advertisement
Rev 1.0 Apr.10
3. In the last row of the table, in the first
the application for outgoing traffic (to the Internet, sent through the trigger
ports).
Trigger Ports
4. In the
field, enter the port number(s) used to determine that the
application is in use (that is, specify the port number or range of port numbers
that the application uses for outgoing traffic). (Check the user documentation
for the application.)
To specify a range of port numbers, separate the start and end port number
with a hyphen.
Protocol
5. In the second
incoming traffic (from the Internet).
Forward Ports
6. In the
triggered the rule (that is, specify the port number or range of port numbers
that the application uses for incoming traffic). (Check the user documentation
for the application.)
To specify a range of port numbers, separate the start and end port number
with a hyphen.
Enable
7. Ensure
is selected.
Add
8. Click
.
Save
9. Click
.
Removing Ports from the Port Triggering List
1. Ensure you've enabled port triggering. See
page
100.
2. Display the "Port trigger" window.
a. Log in to the home page.
Advanced settings
b. Click
Router > Port Trigger
c. Click
3. To keep the entry in the list (in case you want to re-enable this entry later on),
Enable
clear the
check box.
— or —
To remove the entry from the list:
a. Click the row that you want to remove.
A row of buttons (
Delete
b. Click
.
Protocol
list, click the protocol(s) used by the application for
field, enter the ports to forward to the computer that
(
).
.
Delete
OK
Cancel
,
,
) appears.
list, click the protocol(s) used by
"Enabling Port Triggering" on
Settings
101
Advertisement
Table of Contents
