Remote Node Filter; Figure 4-3 Menu 11.2 - Remote Node Ppp Options; Table 4-2 Remote Node Ppp Options Menu Fields - ZyXEL Communications Prestige 643 User Manual

Prestige 643 ADSL Router
Press Space Bar to Toggle.
The following table describes how to configure the PPP options fields.
FIELD
Encapsulation
Compression
Once you have completed filling in Menu 11.2 – Remote Node PPP Options, press [
message "Press ENTER to Confirm..." to save your configuration, or press [

4.1.5 Remote Node Filter

In Menu 11.1 – Remote Node Profile make sure the Edit Filter Sets field displays Yes by pressing the
[SPACE BAR]. Press [ENTER] to access Menu 11.5 – Remote Node Filter.
Use Menu 11.5 – Remote Node Filter to specify the filter set(s) to apply to the incoming and outgoing
traffic between this remote node and the Prestige. You can specify up to 4 filter sets separated by commas,
eg. 1, 5, 9, 12 in each filter field. For more information on defining the filters, see the Filter Configuration
chapter. Note that there are two versions of this menu depending on whether you use PPPoE encapsulation
or not. When using PPPoE encapsulation, you can also specify remote nodes called filter sets.
4-6
Menu 11.2 - Remote Node PPP Options
Encapsulation= Standard PPP
Compression= No
ENTER here to Confirm or ESC to Cancel:

Figure 4-3 Menu 11.2 - Remote Node PPP Options

Table 4-2 Remote Node PPP Options Menu Fields

Choose CISCO PPP only when this remote node is a
Cisco machine; otherwise, select Standard PPP.
Choose Yes to turn Stac Compression on or No to
turn Stac Compression off.
DESCRIPTION EXAMPLE
Standard PPP
No
(default)
ENTER
] at the
ESC
] at any time to cancel.
Remote Node Configuration