Prestige 202 ISDN Router
4.1.7 Remote Node Filter
Use Menu 11.5 – Remote Node Filter
outgoing traffic between this remote node and the Prestige and also to prevent certain packets from
triggering calls. You can specify up to 4 filter sets separated by comma, e.g., 1, 5, 9, 12, in each
filter field. The default is no filters.
Note that spaces are accepted in this field. The Prestige comes with a prepackaged filter set,
NetBIOS_WAN, that blocks NetBIOS packets (call protocol filter = 1). You can include this in the
call filter sets if you wish to prevent NetBIOS packets from triggering calls to a remote node.
4-10
to specify the filter set(s) to apply to the incoming and
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Call Filter Sets:
protocol filters= 1
device filters
Press ENTER to Confirm or ESC to Cancel:
Figure 4-4 Menu 11.5 – Remote Node Filter
=
Remote Node Configuration