Figure 14-3 Applying Schedule Set(S) To A Remote Node - ZyXEL Communications Prestige 643 User Manual

FIELD
Start Time Enter the start time that you wish the schedule set to take effect in
hour : minute format.
Duration Enter the maximum duration allowed in hour : minute format for this
scheduled connection.
Action Choose an action. Choices are:
Forced On means that the connection is maintained whether or not
there is a demand call on the line and will persist for the time period
specified in the Duration field.
Forced Down means that the connection is blocked whether or not
there is a demand call on the line.
Enable Dial-On-Demand means that this schedule permits a demand
call on the line.
Disable Dial-On-Demand means that this schedule prevents a
demand call on the line.
Once your schedule sets are configured, you must then apply them to the desired remote node(s). Enter 11
from the main menu and then enter the target remote node index. Using the [SPACE BAR], change the
Encapsulation field to PPPoE to make the Schedule Sets field available as shown next.
Rem Node Name= ChangeMe
Active= Yes
Encapsulation= PPPoE
Multiplexing= LLC-based
Incoming:
Rem Login=
Rem Password= ********
Outgoing:
My Login=
My Password= ********
Authen= CHAP/PAP

Figure 14-3 Applying Schedule Set(s) to A Remote Node

You can apply up to 4 schedule sets, separated by commas, for one remote node. Change the schedule set
numbers to your preference(s).
Call Scheduling
DESCRIPTION
Menu 11.1 - Remote Node Profile
Press ENTER to Confirm or ESC to Cancel:
Route= IP
Bridge= No
Edit PPP Options= No
Rem IP Addr= 0.0.0.0
Edit IP/IPX/Bridge= No
Session Options:
Edit Filter Sets= No
PPPoE Idle Timeout(sec)= 0
PPPoE Service Name=
Schedule Sets=
Prestige 643 ADSL Router
EXAMPLE
Forced On
14-3