My Wan Addr Sample Ip Addresses; Remote Node Filter; Figure 16-4 Sample Ip Addresses For A Tcp/Ip Lan-To-Lan Connection - ZyXEL Communications Prestige 623R-T User Manual

Prestige 623R-T ADSL Dual-link Router

16.4.1 My WAN Addr Sample IP Addresses

The following figure uses sample IP addresses to help you understand the field of My Wan Addr in menu
11.3. Refer to the previous LAN and WAN IP Addresses figure in the web configurator chapter on LAN
setup for a brief review of what a WAN IP is. My WAN Addr indicates the local Prestige WAN IP
(172.16.0.1 in the following figure) while Rem IP Addr indicates the peer WAN IP (172.16.0.2 in the
following figure).

Figure 16-4 Sample IP Addresses for a TCP/IP LAN-to-LAN Connection

16.5 Remote Node Filter

Move the cursor to the Edit Filter Sets field in menu 11.1, then press [SPACE BAR] to select Yes. Press
[ENTER] to display Menu 11.5 – Remote Node Filter.
Use Menu 11.5 – Remote Node Filter to specify the filter set(s) to apply to the incoming and outgoing
traffic between this remote node and the Prestige and also to prevent certain packets from triggering calls.
You can specify up to 4 filter sets separated by comma, for example, 1, 5, 9, 12, in each filter field.
Remote Node Configuration 16-9